Foundation specialist can install sheet piles without vibration at any location
Tekst Susan PeekFotografie Kandt

Kandt has extensive knowledge and experience in installing and removing steel sheet piles at a wide variety of locations and in very diverse conditions. Marco Kandt, director of the contracting and foundation company, explains that sheet piles are normally installed using high-frequency vibration. “But there are projects where the traditional method is not possible or desirable. We can provide a solution in those cases too.”

Installing sheet piles in a historic centre
Kandt cites a project in the heart of Oudewater’s historic centre as an example. “The Oranje Bolwerck is located there, a remnant of the former fortifications that once surrounded the entire town. The site is being redeveloped for residential use. Designed by Jillis Kinkel architect, the development will comprise 53 apartments and an underground car park.”
Temporary construction pit
At this historic and prominent site, which has significant spatial and cultural heritage value for Oudewater’s town centre, Kandt worked with Van Baaren Aannemers to construct a large temporary construction pit for the basement. “The site borders the Grote Gracht, a municipal monument, and Sint Janstraat, and is close to St. Franciscuskerk, the former public school and the historic music house. To prevent disturbance and damage to the surrounding area, we chose to press the steel sheet piles into the ground, installing them without vibration.”

Quadruple piling machine
“We used the quadruple piling machine here,” says Kandt, explaining: “This is a leader-guided machine that installs four individual sheet piles without vibration in a single operation. It works very quickly and efficiently, especially on projects involving a large number of sheet piles.” This shows that Kandt is keen to work with its clients to find solutions. This is also evident from the fact that Kandt fully anchored the construction pit with grout anchors. “This means the contractor is not obstructed by the bracing frame while building the basement, and can excavate freely.” Kandt does not even mention the considerable challenge of getting the machinery to the site in this idyllic village, with its many small quay walls. “We never shy away from a challenge.”

Silent Piler
Another project that demonstrates Kandt’s capabilities is in Spijkenisse. “We worked on the redevelopment of Noordkade Spijkenisse Centrum for GKB from Barendrecht. The project borders a shopping centre and homes, so it was vital here too to work carefully and prevent disturbance and damage. We used our Silent Piler, which can press in sheet piles at both restricted and unrestricted working heights. This technique is also entirely vibration-free.”
Kandt’s Silent Piler is more compact, enabling it to reach places inaccessible to large machinery. “We use this machine at hard-to-reach sites or on urban projects,” says Kandt. “The machine installs one pile per operation. It was ideal for this project, not only because of the limited space on site, but also because the sheet piles had to follow a curve: they needed to follow the line of an existing retaining wall. This is not an everyday job, but thanks to the knowledge and skills of our people on site, this project too was completed to an excellent standard.”

Kandt concludes: “We say it for a reason: great work is something we do together. But having the right equipment also enables us to install sheet piles without vibration at any location.”
Een zakelijke vraag aan Kandt Aannemings- en Funderingsbedrijf BV? Neem contact op
Bedrijven in dit verhaal
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ThemaStil en emissievrij bouwen
- OnderwerpFoundation techniques
- BedrijfKandt Aannemings- en Funderingsbedrijf BV



















