Product information

Architectural concrete manufacturer makes a sound choice for Belgian lifting equipment

Tekst Philippe DoutreligneFotografie DEMAN

Algemeen overzicht van de productiehal.
Algemeen overzicht van de productiehal.

Stijlbeton nv of Lier is equipping its new production hall with high-performance lifting equipment from Constructiewerkhuizen Deman nv of Sint-Eloois-Winkel in West Flanders. This gives the architectural concrete specialist not only an experienced partner, but also high-quality equipment that will help it further increase production volumes and profitability in the years ahead.

New, versatile production hall

The new production hall, 35 m wide and 82 m long, is being fitted with two overhead travelling cranes, each with a lifting capacity of 20 tonnes. Given the planned range of activities, the two cranes will not be able to handle every operation. For this reason, the company opted for three wall-mounted travelling cranes directly below the overhead cranes, ideal for three-dimensional work along linear axes of movement. The cranes can travel the full length of the building, increasing the accessible floor area.

Side view of one of the three wall-mounted travelling cranes.

Wall-mounted travelling crane or semi-gantry crane

Wall-mounted travelling cranes require a higher investment than semi-gantry cranes, but offer additional benefits. Their main advantage is that they present no obstacle at floor level. A gantry crane not only has a rail on the floor, but its leg can also pose a collision risk. Additional safeguards can greatly reduce this risk, but the restriction on space around the rail remains. In this case, opting for wall-mounted travelling cranes therefore provided the best possible solution. 

Specific challenges 

The challenge posed by Stijlbeton's specific requirements was the relatively long reach combined with a high lifting capacity, namely 12 m and 8 tonnes. The long reach would allow the hall, with its 35 m span, to be divided flexibly into three work zones of more than 10 m each. Since the wall-mounted travelling cranes will only handle concrete elements weighing up to 8 tonnes in the area close to the wall, Deman saw an opportunity to achieve substantial savings by using a ‘3-step-load-limiter’. This allows the maximum lifting capacity to vary according to the position of the hoist. The selected configuration met all of Stijlbeton's requirements. The ‘Load Restriction’ smart feature made it possible to reduce the crane's weight, with associated savings on the crane runway, columns and foundations thanks to lower wheel loads.

Detail of the gantry crane.

Safety and efficiency 

The high hoisting speeds of the travelling cranes can pose risks if they are operated incorrectly. For this reason, the optional ‘Shock Load Prevention’ feature was selected. If a load is picked up abruptly, it reduces the hoisting speed until the load has been lifted clear. This eliminates sudden shocks to the crane, extending the service life of the crane and its runway structure while also minimising wear on mechanical components such as cables, the cable drum and the geared motor. Another Smart Feature, ‘Load Floating’, uses motor power to hold the load in position for several seconds after a stop, without engaging the motor brake. This enables a faster, smoother restart and gives the operator better control over the lifting movement.

Gantry cranes 

Finally, the production hall will also be fitted with two gantry cranes, each with a lifting capacity of 20 tonnes, for moving concrete elements from the production area to the outside. To rotate heavy loads safely in the air, one of these gantry cranes will be fitted with two hoists and the ‘Load Turning Hoist’ option. One of the hoists will be modified to operate with a larger cable angle of up to 15°. These lifting devices are designed for outdoor use and can operate safely in wind speeds of up to Beaufort force 6. For safety reasons, the rails for these gantry cranes will be fully recessed into the floor. This minimises the risk of tripping and reduces obstruction to forklifts and transport trucks crossing the rails.   

Een zakelijke vraag aan DEMAN? Neem contact op

Bedrijven in dit verhaal

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • OnderwerpProduct information
  • BedrijfDEMAN
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.