Schöck launches post-installation solution with Willems Anker BV

Schöck Nederland has launched a new post-installation system for creating large cantilevered concrete balconies on existing buildings.
Combining Isokorf® technology with Willems Anker provides an optimised load transfer and eliminates thermal bridges in the balconies. A major advantage of the system is that the balconies can be installed from a crane after construction, without the need for temporary supports.
Renovation
When renovating buildings, increasingly stringent requirements are being set for living comfort and building energy performance. The existing balcony is often a problem: it is outdated, too small or creates significant thermal bridges in the building. In addition, the existing floor is often unable to support a large, heavy balcony. Schöck has addressed this problem by using Isokorf® RT and Willems Anker to distribute the loads between two floors.
Simple installation
Installing the balconies requires just two holes to be drilled in the floor for each Isokorf® element. The elements are only 190 mm high, so they can be fitted in almost any floor. The balconies can be installed in just a few minutes using a special adapter plate. Adjusting the balconies afterwards is also very straightforward thanks to Willems Anker.
Also suitable for new-build projects
Schöck and Willems' post-installation solution is also suitable for new-build projects. Further information and the installation instructions are available on the Schöck website.
https://www.schock.nl/nl/willems-anker
Watch the video here:
Vraag over dit verhaal? Stel je vraag
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- OnderwerpProduct information


















