Connections & connection techniques

SPECIAL | Circular connection techniques for precast concrete

SPECIAL | Circular connection techniques for precast concrete

Building quickly, efficiently and safely with fewer workers. All this speaks in favour of prefabrication, a method that is becoming increasingly popular in the Dutch and Belgian construction sectors. Dry connection techniques are also benefiting from this success and gaining ground over wet connections. We speak to Wim Zwaan, director of Peikko Benelux, about the widespread acceptance of these connection techniques, which originated in Finland.

Finland has short summers and long, cold winters. According to Zwaan, it is no surprise that prefabrication is the rule rather than the exception there. Casting connections in place takes a lot of time: the watchwords are to build quickly, efficiently and safely. “Our column shoes and SUMO wall shoes make this possible. They create a structural connection straight away and significantly speed up construction. This makes it possible to erect up to 2.5 times as many columns as with the traditional method using starter bars and sleeves.”

Demountable precast walls without sleeves.

Building without bracing

The column shoes are installed at the precast plant, while the anchor bolts are cast into the structure on site. Zwaan says: “On site, all you have to do is bolt the column shoes to the anchor bolts, and a stable structure is created straight away. No bracing is needed, and there is no need to grout sleeves. This saves a lot of time and labour, (expensive) crane hours and the effort of carrying braces around. It is also a more ergonomic method.” According to Zwaan, this ‘Finnish’ method has gained considerable momentum in recent years, both for taller columns (17-18 metres), for which no standard bracing is available, and now for shorter columns too. “Our systems are also a good alternative for the relatively small precast columns in underground car parks. Braces no longer need to be removed from site, after all. It makes the process quicker and easier.”

Quick, brace-free installation of the precast concrete column.

Circular economy

SUMO wall shoes offer the same benefits as column shoes and are based on the same principle, with anchors in the supporting structure and shoes in the wall. “Unlike column shoes, the first wall to be installed does need to be braced. A wall cannot immediately create a stable, moment-resisting structure. But starter bars and sleeves are now a thing of the past. This is particularly beneficial for walls in apartment buildings, for example, where a flat, aesthetically pleasing finish is required. Unlike the holes left by sleeves, the wall shoes are no longer visible. They disappear beneath the floor screed. Both types of bolted connection, for columns and walls, can also be dismantled. These connection techniques therefore also contribute to the circular economy, helping to preserve the value of the precast elements.”   

Een zakelijke vraag aan Peikko Benelux? Neem contact op

Bedrijven in dit verhaal

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ThemaMinder CO2 in beton en staal
  • OnderwerpConnections & connection techniques
  • BedrijfPeikko Benelux
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.