Thermoplastic powder coating with exceptional properties

Developments in the world of coatings are moving fast. One notable example is Abcite®. This thermoplastic powder coating has already been widely used in the drinking water industry. Given its excellent properties, including durability, the coating is now also being used in other markets.
However powerful the protection offered by Abcite®, its application is remarkably straightforward. Abcite® is applied in a single layer, immediately providing excellent corrosion protection. It is a product of EUROLACKE, which represents manufacturer Axalta in the Netherlands. John Theewis, director of EUROLACKE, sees great potential for Abcite®. Its appeal lies not only in its high level of corrosion protection: Abcite® also offers excellent resistance to impact, scratching and wear, UV radiation and weathering, as well as chemical resistance and electrical insulation. Abcite® has earned several quality labels.
Flexible
“The coating is applied to a warm substrate,” says Theewis. “The powder effectively melts onto the object. This produces excellent corrosion protection and strong adhesion to the substrate. The coating is also flexible, bending with the substrate if it is affected. This makes it resistant to mechanical stresses such as bending, impact and scratching.”
Short turnaround time
Abcite® is applied directly to the blasted surface to be protected. The only step required is to heat the object. Theewis says: “Of course, heating the object takes time. There are clear instructions for this. What’s more, you make up that time later. The product is so effective that a single layer meets the highest corrosion protection standard. The coating is dry immediately and requires no further treatment.”
Properties and references
Abcite® contains no solvents or hazardous substances. As a result, it is already widely used in applications such as the drinking water industry, swimming pools, perforated panels (in coastal areas), fencing, military vehicles, cable trays, shipbuilding, fisheries, offshore installations and street furniture. In short, it is suited to harsh conditions and locations where protection against corrosion, mechanical stress and/or chemical exposure is important.
Edge coverage
“Another property worth mentioning is its excellent edge coverage,” Theewis concludes. “This was demonstrated on a heavily used swimming pool ladder with sharp, round holes. Even after prolonged use, the Abcite® coating remained intact.”
Een zakelijke vraag aan EUROLACKE Poedercoatings? Neem contact op
Bedrijven in dit verhaal
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ThemaMinder CO2 in beton en staal
- OnderwerpTreatment & protection
- BedrijfEUROLACKE Poedercoatings



















