Concrete

Certified T-head bars and reinforcement couplers

Tekst en beeld HRC Europe

HRC400-serie wapeningsstaalkoppelingen.
HRC400-serie wapeningsstaalkoppelingen.

Since 1979, HRC has supplied millions of solutions for a wide range of construction projects in Europe, North America and beyond. HRC is known not only for manufacturing products of consistently high quality at competitive prices, but also for its active role in developing industry standards and building regulations.

A crate of HRC100 T-head reinforcement ready for dispatch.

Product development at HRC is an ongoing process, aimed at maintaining a leading position in product documentation. As an industry pioneer, HRC was the first to introduce a European Technical Assessment (ETA) for T-head bars in 2018. The latest revision of this ETA includes:

  • T-head reinforcement with a diameter of 28 mm.
  • Stainless steel products. Stainless steel T-head bars make it easier to detail reinforcing steel effectively, even where corrosion resistance is required.
  • Expanded declaration of fatigue performance.
  • Addition of the HRC200 series of T-head reinforcing bars. Developed in the 1990s with improved fatigue properties. Although the HRC100 series is often sufficient, HRC200 offers a solution for structures exposed to severe fatigue loading.

What are ETA, EAD and CE markings?

A relevant question is what an ETA (European Technical Assessment) means and what it does. This process began almost twenty years ago, when the growing use of reinforcement products such as couplers and T-head bars created a need for product standards. The aim was not to standardise the products themselves, but to establish essential minimum performance requirements for these reinforcement products.

Two relevant ISO standards have been developed:

  • ISO 15835: Steel for the reinforcement of concrete, Reinforcement couplers for mechanical splices of bars.
  • ISO 15698: Steel for the reinforcement of concrete, Headed bars.

Both ISO standards define performance categories for different loading conditions: category B, with requirements for strength and ductility, and categories F (fatigue) and S (seismic) for fatigue and earthquake loading scenarios. To harmonise technical specifications in Europe, EOTA developed European Assessment Documents (EADs) under the Construction Products Regulation. The two ISO standards above are recognised in 2 EADs, for example through the use of the same performance levels: B, F and S.

An EAD applies to a ‘family’ of similar products and forms the basis for a European Technical Assessment (ETA). An ETA is developed for a specific product and declares its performance. The product is CE marked on the basis of the ETA.

Advice on CE marking: when products are CE marked on the basis of an ETA, the CE marking is the visible indication that the product has been assessed for the performance declared by the manufacturer. This means that similar products with different performance levels can also carry the CE marking. The idea is that manufacturers can describe the performance of their products. However, users must confirm that the declared performance meets the requirements of their particular project. It is therefore essential to examine the underlying declarations of performance associated with the CE marking.

Products now included in the ETA: HRC150S stainless steel T-head bars and the HRC200 series.

Performance of HRC products

HRC Europe's manufacturing processes are certified to ISO 9001 and ISO 14001. In addition, HRC T-head bars and the HRC400 series of reinforcement couplers are fully certified to the relevant ISO standards. Specifically, HRC T-head reinforcement is covered by ETA-08/0035, which was updated in December 2024. The declared performance of these products includes strength and ductility, ensuring that the full strength of the reinforcing bar is anchored, as well as excellent performance under seismic and fatigue loading.

ETA-22/00573, relating to HRC400 reinforcement couplers, was published in 2022. This technical assessment provides evidence of the high strength of HRC400 connections under both static/quasi-static and dynamic loading simulating an earthquake. In both loading scenarios, the HRC400 couplers exceed the required reinforcement strength, with tests resulting in ductile bar failure combined with very low slip. 

The technical performance of HRC400 is just one of its advantages. For practical use on site, fast and reliable installation is just as important. HRC's specially designed coarse, tapered threads make installation on site straightforward.

The Afsluitdijk, one of the projects using both HRC T-head bars and HRC400 reinforcement couplers.

Production in Flevoland

Since 2015, HRC has established production in Flevoland, enabling fast, reliable and flexible deliveries. This local production facility allows HRC to respond more closely to its customers' needs. Whether the products are T-head bars, reinforcement couplers, steel-to-concrete anchorages or combined products, HRC's Dutch production facility is known for excellent service and reliable deliveries. The products have become an essential part of many Dutch infrastructure and water engineering projects, high-rise buildings, car parks and other structural applications.

Following the latest update to its product certification, HRC offers an extensive range of products with specific properties. This makes it easy for users to find certified HRC products that not only solve their specific problems, but also contribute to innovation in the industry.   

Een zakelijke vraag aan HRC Europe NL? Neem contact op

Bedrijven in dit verhaal

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ThemaNormen, testen en aansprakelijkheid
  • OnderwerpConcrete
  • BedrijfHRC Europe NL
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.