Concrete

Distinctive formwork solution for car park entrance wall

Tekst en beeld NOE Bekistingtechniek

Voor het in het werk storten van de gekromde entreewanden werd gebruik gemaakt van het NOEtop bekistingsysteem.
Voor het in het werk storten van de gekromde entreewanden werd gebruik gemaakt van het NOEtop bekistingsysteem.

High-concrete art in the dunes of Scheveningen

The Northern Harbour Head in Scheveningen is being redeveloped to make space for businesses in the harbour and to strengthen Scheveningen boulevard as a tourist attraction. As part of the redevelopment, a car park with 840 spaces has been built on Strandweg. Its entrance walls are made of fair-faced concrete and were constructed by B-smart fundering B.V. They are notable for their curved, rising, in-situ cast form and two-tone concrete finish. The lower section of the walls also features fluting. NOE-Bekistingtechniek and NOE-Betonvormgeving developed an ingenious formwork solution in consultation with B-smart.

Curved, rising, in-situ cast walls.

The redevelopment of the Northern Harbour Head is being carried out by VolkerWessels Vastgoed. The project was initiated by several local businesses, which worked with the municipality and VolkerWessels Vastgoed to conduct a feasibility study and draw up a plan. The plan is now being implemented in phases. 

Car park 

Continental Car Parks was responsible for building the car park. To make way for construction, 130,000 cubic metres of dune sand was first excavated and removed. Some of this sand will be returned, so that the car park is effectively set into the dune and completely concealed from view. The entrance is the only part that remains visible. Designed by architecture practice Team V, it is the crowning touch: the walls follow the contours of the dune and curve outwards. Notable features include the anthracite and grey concrete and the crisp fluting. The design places considerable demands on the formwork technology and design, as well as on concrete placement.

With normal use, NOEplast formliners can be reused around 100 times.

A challenging combination

“The challenge lies in combining formwork technology, concrete technology and casting techniques,” says Sandro Boots of B-smart. “For the car park walls, the architect chose a combination of anthracite and grey fair-faced concrete. The grey upper section had to be completely smooth, while the anthracite lower section was to be fluted. The grey band at the top runs from one wall to the other, framing the entrance. We drew up a plan based on these requirements. We then looked for a partner to develop and implement it. We chose NOE-Bekistingtechniek and NOE-Betonvormgeving, which have extensive experience with projects of this complexity.” 

Special NOEplast formliner

NOEplast formliners were used to create the fluted texture on the lower section of the concrete. NOEplast offers a wide range of standard relief textures and designs. Boots: “The fluting profile envisaged by the architect had to be specially made. A new counter-mould, tailored exactly to the architect’s requirements, was used to create an intermediate production negative, which in turn served as the basis for the final NOEplast formliners. The liners were fitted inside the formwork so that their pattern would be imprinted on the cast concrete. They are made of polyurethane, which is flexible but requires care when striking the formwork.”

To achieve the curved shape, cassettes were fitted to the front of the formwork, on the sea-facing side.

NOEplast formliners can be bonded into moulds (precast), glued to the formwork or secured with nails or screws on site. Concrete can then be poured onto or against them. To simplify the use of NOEplast liners on site as much as possible, they can be supplied ready-mounted on a formwork panel. Once the concrete has hardened and the mould or formwork has been removed, the liner’s relief remains visible as an imprint. The liner can then be cleaned with a light wash and used again. With normal use, NOEplast formliners can be reused around 100 times.

NOEplast formliners were used to create the fluted texture.

Curved NOEtop formwork

The NOEtop formwork system was used to cast the curved entrance walls in situ. Both the anthracite and grey concrete were poured into the same formwork. Boots: “To achieve the curved shape, cassettes were fitted to the front of the formwork, on the sea-facing side. As dune sand would eventually be placed against the back of the concrete wall, only the uppermost 20 cm of the rear face was finished as fair-faced concrete. The walls are not only curved, they also increase in height towards the entrance. This rising profile follows the contours of the dune, allowing the entrance to blend seamlessly into the landscape.” The formwork reaches a maximum height of 4.50 metres. 

The art of casting at height

Once the reinforcement had been placed in the formwork and the formwork closed, the concrete could be poured. A special concrete mix was used that achieved high stiffness during casting. “This was necessary to cast the sloping wall in a single day. The anthracite concrete was poured in 50 cm layers and compacted immediately. The rate of pouring is crucial to the final result. If it is too slow, there is a risk of colour variation. If it is too fast, numerous air bubbles may be visible on the surface. Different release agents were also used for the fluted and smooth concrete sections.” 

Formliners were fitted inside the formwork.

To prepare for every eventuality, B-smart first produced a representative, 1-metre-wide mock-up using the same design and conditions as the finished wall. As with the mock-up, the completed entrance wall was struck in one go, four days after the final pour, to prevent discolouration. Boots: “Thanks to thorough preparation, we achieved an excellent result despite the varying weather conditions and the complexity of the project.” 

Een zakelijke vraag aan NOE-Bekistingtechniek? Neem contact op

Wie eraan werkte

Parkeergarage Noordelijk Havenhoofd in Den Haag

  1. parkeergarage te bouwenContinental Car Parks
  2. opdrachtgeverVolkerWessels Vastgoed
  3. montageMammoet
  4. bekistingoplossingNOE Bekistingtechniek
  5. architectTeam V

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ProjectParkeergarage Noordelijk Havenhoofd
  • OnderwerpConcrete
  • BedrijfNOE-Bekistingtechniek
  • BedrijfTeam V
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.