The Hague cycle bridge | Construction of Jan Linzel Viaduct is a challenging project

Construction of Jan Linzel Viaduct over the A4 presents many challenges. The cycle bridge between the Ypenburg district and central The Hague is 335 metres long in total. The construction itself, as well as transporting the enormous bridge sections, called for considerable expertise and skill.
Hillebrand, part of ASK Romein, was responsible for constructing and transporting the bridge sections for this project, involving around 900 tonnes of steel. The company specialises in manufacturing complex steel structures for the offshore sector and delivering hydraulic engineering projects such as bridges and locks. It has all the facilities required for this work: yards on deep water with generous loading and unloading quays, extensive storage and production capacity, and staff with specialist training. Willie
Lievense, project manager at Hillebrand:
“We manufacture steel structures to a very high quality. Our sites in Vlissingen and Middelburg are therefore fully equipped to deliver high-quality one-off specials
for both the offshore sector and bridge construction.”

High quality
Bridge construction is a specialist field with its own distinct dynamics. Bridge projects differ from other steel construction contracts because of their lengthy and intensive lead-in period. The company spent more than a year engineering and constructing the nine separate bridge sections, all made entirely from S355 steel. “Hundreds of individual plates were welded together in a specific sequence, forming the cycle bridge’s box girder,” says Lievense. “The cycle bridge has two main spans, each 85 metres long, and five approach spans, each spanning 33.8 metres. The result is a very slender-looking, slightly curved structure, which is only possible with steel.”

By special heavy road transport.
Anchoring
The entire bridge is fixed at one end. Sliding bearings were installed at the other supports on the concrete piers, allowing the bridge to expand and contract freely. This is necessary to accommodate movement caused by temperature fluctuations.

Transporting the enormous bridge sections called for considerable expertise and skill.
Labour-intensive
Lievense: “Making a single bridge section took around eight to nine weeks. In total, 900 tonnes of steel went into the 335-metre-long box girder, which is 6.5 metres wide and 2.5 metres high. ABT carried out the main structural calculations in consultation with Dura Vermeer, our client. Based on these, we completed the detailed engineering and finalised the design, including the working drawings and production drawings.”

Transport by ship from Middelburg. (Image: Patrick Hattori)
Challenging transport
Transport to The Hague was, in fact, the biggest challenge of the entire project. “We usually build bridges over water,” explains Lievense, “but this one crosses a motorway, which has implications for transport. The first four bridge sections were loaded onto a boat at Hillebrand and taken from there to Mammoet Road Cargo’s site in Schiedam. The load was unloaded there and taken to The Hague on trailers using special heavy transport.” The A4 was closed for two nights so that mobile 750-tonne cranes could lift the first bridge sections into place. A detailed operations plan was drawn up, including the traffic management measures. “Closing a motorway is no simple matter. A 65-metre-long truck and trailer combination cannot simply negotiate bends and roundabouts. Traffic signs, traffic lights and street lamps had to be removed. Getting everything transported was quite an achievement!” concludes Lievense.
Vraag over dit verhaal? Stel je vraag
Wie aan Jan Linzelviaduct werkte
- projectleiderDura Vermeer Infra Regio Zuid WestGenoemd in The Hague Trekfietstracé | Final phase of construction begins on Jan Linzel Viaduct near The Hague
- technische conserveerbedrijfCuijpers Services BVGenoemd in The Hague cycle bridge | Cycle bridge to receive high-quality coating
- constructiebedrijfHeeremaGenoemd in The Hague cycle bridge | Cycle bridge to receive high-quality coating
- hoofdberekeningABTIn dit verhaal
- transportMammoet Road CargoIn dit verhaal
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ProjectJan Linzelviaduct
- ThemaBruggen en kunstwerken langer mee
- OnderwerpGeneral
- BedrijfABT
- BedrijfMammoet Road Cargo


















