General

INSPECTION GANTRIES: from finishing touch to key feature

INSPECTION GANTRIES: from finishing touch to key feature

Inspection gantries on structures were often installed at the same time as a bridge or viaduct was built, and at the time marked the completion of the project. That is no longer the case today. They have become an essential part of maintaining a structure and must also be inspected periodically. Metaalindustrie Qumey specialises in the manufacture and reconstruction of these inspection gantries.

Metaalindustrie Qumey takes care of the entire process, from engineering to manufacture and installation of the inspection gantry.

Qumey Metaalindustrie

An inspection gantry is part of a (movable) steel bridge. “They are suspended beneath the bridge and consist of steel work platforms that travel underneath it,” explains Mark Meijers, managing director and owner of Metaalindustrie Qumey. “The underside of the bridge can be inspected closely for defects from the inspection gantry.” Qumey has been involved in rail and road infrastructure projects as a steel construction company since 1963. “Over the years, we have built up extensive expertise in inspection gantries. We work throughout the Netherlands and have been closely involved in Rijkswaterstaat’s IVOD programme since 2014. It covers variable maintenance on the road network, viaducts, bridges and tunnels in the South West Netherlands region, including Brug over de Noord, Van Brienenoordbrug, Haringvlietbrug, Merwedebrug and Spijkenisserbrug. To date, more than forty inspected gantries have been delivered as part of this project.”

Work equipment
An inspection gantry is a piece of work equipment (machinery) that must comply with applicable legislation and the relevant standards, including the Machinery Directive. Meijers says: “The owner, usually ProRail, Rijkswaterstaat or the provincial authority, is responsible for this. Many inspection gantries are now dated and no longer comply with current legislation and regulations. Owners are often unaware of the applicable requirements and how they need to be met. That is where we come in. Qumey is ideally placed to relieve owners of this burden and support them.”

In the past, inspection gantries were hardly ever inspected. As mentioned, they were the finishing touch to a project, and many therefore fall short of current safety standards. This is the main reason why these gantries are now being upgraded on a large scale or even replaced entirely. “At the end of 2018, we replaced the last of a total of seven inspection gantries on Van Brienenoordbrug. Earlier, following the discovery of cracks in Merwedebrug in Gorinchem, we had to deliver the inspection gantries ahead of schedule.”

From A to Z
The condition of the inspection gantries Qumey encounters varies. Meijers says: “Naturally, if current standards can be met with limited modifications, that is our preference. But often an inspection gantry dates back to a bygone era, leaving a new structure as the only realistic option. We take care of the entire process, from engineering to manufacture and installation.” Inspection gantries are also highly valuable to ProRail and the provinces, as well as Rijkswaterstaat, for monitoring structures over or under the railway. “Since 2017, ProRail has been carrying out a thorough upgrade of its inspection gantries, and we have completed several projects. ProRail’s structures are often easier to assess, and their dimensions are generally standardised. Road bridges, on the other hand, vary considerably in size, which means their inspection gantries also vary more. For example, the inspection gantry beneath Van Brienenoordbrug is 36 metres long, 8 metres high and has several levels.”

Qumey is also on hand in the event of faults, inspection work and maintenance. “We also assist engineering firms with inspections and statutory examinations,” Meijers concludes. 

Words | Roel van Gils   Image | Metaalindustrie Qumey
Featured image: An inspection gantry is a piece of work equipment (machinery) that must comply with applicable legislation and the relevant standards, including the Machinery Directive.

Vraag over dit verhaal? Stel je vraag

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ThemaBruggen en kunstwerken langer mee
  • OnderwerpGeneral
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.