General

Smart monitoring of bridges

Tekst Roel van GilsBeeld Civiele technieken deBoer

Smart monitoring of bridges

Bridges and viaducts may seem indestructible, but many structures in the Netherlands are nearing the end of their technical service life. They urgently need maintenance. At the same time, budgets and capacity are limited. Using smart sensors and innovative measurement methods, Civiele technieken deBoer provides insight into how bridges and viaducts behave. Continuous insight into the actual condition of structures makes it possible to plan maintenance more effectively and, in some cases, even defer it without compromising safety. Anton Gorter of Civiele technieken deBoer takes us through three recent projects and shows how this approach works in practice.

At a structure in Dordrecht, displacement sensors at the bearings raise the alarm when the bridge deck is fully resting on the support structure.

“At a structure in Dordrecht, the monitoring challenge concerns the well-known problem with the tooth/notch construction,” Gorter begins. “A permanent support structure has been installed beneath the bridge. This structure has now been activated and is carrying some of the load. This raised an important question for Rijkswaterstaat: how do you know when the original structure is no longer functioning and the load is being fully transferred?”

Load tests

To establish this, highly accurate displacement sensors were installed at the bearings. “The sensors were calibrated using load tests, with a 40-tonne lorry positioned at specific points on the bridge,” Gorter explains. “By measuring the compression of the bearings, we were able to establish a reliable reference framework. The monitoring system was then configured to raise an alarm when the bridge deck is fully resting on the support structure. This means the system provides continuous monitoring. One additional challenge was that the structure was already carrying part of the load. This makes it difficult to distinguish between carrying and not carrying the load. Smart data processing and the combination of measurements, including temperature readings from the bridge deck, filter out external influences and provide a reliable picture.”

Civiele technieken deBoer has developed a monitoring setup for a cable-stayed cycle bridge for the municipality of Almere.

Arrow and arch

Civiele technieken deBoer has developed a monitoring setup for a cable-stayed cycle bridge for the municipality of Almere. “The bridge is about to undergo a major maintenance programme, and the client wants a precise picture of the structure’s condition,” Gorter says. “Following a visual inspection of the stay cables, bearings and connections, among other components, the decision was made to carry out a more detailed analysis by measuring the cable forces. We use what is known as the taut string method. This involves installing fibre-optic sensors that can measure the vibration of the cable with great accuracy. The first measurements have now been taken and translated into the precise loads acting on each cable. This information provides an important basis for the bridge’s future maintenance.”

From inspection to digital twin

Alongside these individual projects, Civiele technieken deBoer also carries out a wide range of work on a larger scale under maintenance contracts, from inspections and reports to coordinating minor and major maintenance. This includes everything from painting railings to replacing bearings or installing steel reinforcement. “We assess whether the work can be carried out in-house or whether collaboration with external parties is needed,” says Gorter, who concludes by mentioning the Sublime project in Amsterdam. “Work is under way on a digital twin of the Van Halbrug. Fibre-optic strain sensors and temperature measurements are being used to monitor the bridge’s behaviour closely. Here, too, a load test is being carried out, with a calibrated lorry driven across the bridge at different positions and speeds to measure the effect on the steel deck. The data are linked to advanced 3D calculation models to assess the bridge’s remaining service life. The system being developed here will serve as a blueprint for other bridges and even entire bridge families.” 

At the Van Halbrug, fibre-optic strain sensors and temperature measurements are used to monitor the bridge’s behaviour closely.

Vraag over dit verhaal? Stel je vraag

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ThemaBruggen en kunstwerken langer mee
  • OnderwerpGeneral
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.