Rot-proof railing installation

Thanks to DJP ISOFIX, French balconies and fall protection can be fixed safely, easily and durably to timber frames. The unique, closed plug sleeve prevents contact between metal and wood and ensures a watertight seal. This puts moisture ingress, internal condensation and wood rot firmly in the past. The A4-grade stainless steel fixing is always corrosion-free, even in coastal areas.
The fixing points are prepared at the joinery factory, so the frame is ready for railing installation as soon as it arrives on site. On site, the threaded rods are screwed into the plugs, with no risk of the wood splitting thanks to the plugs’ unique design. In an emergency, the plug can be installed on site using a DJP ISOFIX DRILLING TEMPLATE; all that is needed is a drill and adhesive. This makes the patented DJP ISOFIX the ideal replacement for all other fixing systems on the market.

The unique, closed plug sleeve prevents contact between metal and wood and ensures a watertight seal.
EASILY ADD VALUE WHILE RETAINING THE WARRANTY
DJP ISOFIX plugs are installed in near-fully automated processes under controlled conditions. Installation is straightforward and fits the standard joinery-factory process. The system, including the connection made on site, is certified to SKH assessment guideline BRL 0801, allowing warranties to remain valid.
SIGNIFICANT REDUCTION IN INSTALLATION TIME
On delivery, the frame is ready for railing installation. The work can even be completed by one person in a single pass.

The A4-grade stainless steel fixing is always corrosion-free, even in coastal areas.
SIGNIFICANT REDUCTION IN FAILURE COSTS
The railing supplier and joinery factory coordinate the fixing points and tolerances directly, minimising the risk of errors on site. Measuring and drilling on site in advance are things of the past.
UNIVERSAL
The system is suitable for installing all types of railings. Its performance is assured in accordance with Eurocode (strength) and SKH guideline BRL 0801 (durability).
CAN ALSO BE INSTALLED ON SITE
Ideally, the joinery factory will drill the fixing holes and install the DJP ISOFIX plug in the frame. The holes can also be drilled manually. A special drilling template has been developed for this purpose. The DJP DRILLING TEMPLATE has two height-adjustable drilling positions and a stop at the bottom that is positioned against the reveal. This makes it very easy to drill the holes in the correct position. It can be used on either the left or right, and with 67 mm or 90 mm mullions.
Vraag over dit verhaal? Stel je vraag
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- OnderwerpGeneral


















