General

Working safely in construction

Working safely in construction

As an employer in the construction sector, it is essential to provide your staff with a safe workplace. Every construction company should therefore have a clear occupational health and safety policy to ensure a safe working environment that complies with health and safety regulations. This policy must also be actively communicated to staff so that they are aware of the rules and guidelines wherever they are and at all times.

Personal protective equipment

Many accidents can be prevented by using personal protective equipment such as head, hearing, eye and respiratory protection. Wearing hand protection and sturdy safety footwear can also prevent many accidents. However, most serious accidents occur when working at height. Using proper fall protection is therefore essential.

Roof edge protection

To make working at height as safe as possible, roof edge protection is widely used. Roof edge protection allows workers to move around the roof without restriction, without the risk of falling. In many cases, roof edge protection is therefore an effective form of fall protection that complies with health and safety regulations. There are also many different types of roof edge protection, so a suitable option can be found for every type of job.

Permanent or temporary roof edge protection

When roof edge protection is required, you can choose between permanent and temporary roof edge protection. The right option depends on the building and the type of work. Are there installations on the roof that require regular maintenance? In that case, it is advisable to have permanent roof edge protection installed to ensure the installations can always be accessed safely. Does the roof only need refurbishment, with no further work at height planned afterwards? Temporary roof edge protection is then more suitable. If permanent roof edge protection is preferred, but for certain reasons it is not practical to have fixed barriers on the roof, fold-down roof edge protection is an option. This type of roof edge protection offers the same level of safety as permanent roof edge protection, but can be folded down once the work is complete. This means it is not visible from the ground when no work is taking place.

Vraag over dit verhaal? Stel je vraag

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ThemaVeilig werken
  • OnderwerpGeneral
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.