General

Monitoring prestressing force

Monitoring prestressing force

The world is changing, sea levels are rising, cities are flooding and infrastructure is on the verge of collapse. Not the most cheerful message from Robert Jansen of DYWIDAG, but it is the reality.

DYWIDAG is best known for its prestressing technology. Monitoring is becoming an increasingly important part of its services. In other words, Life Span Management throughout a structure’s entire service life, providing greater insight into its condition so that any repairs or strengthening work can be carried out in good time.

Knowing what is happening and how it is happening allows you to take targeted action and engineer new projects.

At least a thousand bridges in the Netherlands have exceeded their initial service life. But what does that mean? What needs to be done? “Monitoring bridges gives us insight into the current condition of a structure,” says Jansen. “Our Life Span Management department can build a complete picture of changes to structures, not just bridges but also quay walls, locks and so on, by integrating sensors. This provides information not only about any deformation, but also about movement, elongation and shortening. We can also measure the prestressing force and how it changes over time. By identifying exactly where the problem areas are, we can intervene proactively to prevent incidents. Unnecessary maintenance based on ‘traditional protocols’ is also a thing of the past.”

Unnecessary maintenance based on ‘traditional protocols’ is a thing of the past.

Unbonded prestressing

“As an internationally established and operating company, we have the expertise, resources and products in-house, and we take our responsibility very seriously,” Jansen continues. “We are making a major commitment to sustainability and circularity. For example, we are closely following developments in 3D-printed structures, both in prestressing technology and in monitoring solutions. We provided our expertise and systems for the world’s first 3D-printed cycle bridge, which opened in Gemert, Brabant, three years ago, and are now closely involved in the development and monitoring of a 3D-printed bridge in Nijmegen. In general, printing larger structures means that different elements have to be connected. The way prestressing is applied calls for techniques other than the usual methods used in concrete. We have the right solutions for this: unbonded prestressing.”

Monitoring bridges gives us insight into the current condition of a structure.

What gets measured gets managed

Sensors are integrated to monitor the effect of loading on unbonded prestressing in (3D-printed) bridges. Jansen: “All kinds of assumptions are made in advance. By measuring effectively, we can check whether those assumptions prove to be well-founded. The circular viaduct in Kampen is a demountable test bridge made up of separate components. Sensors around the prestressing tendons and beneath the bridge measure deformation caused by the load on the deck. Temperature sensors have also been installed both above and within the deck, and cameras are used to assess the type of traffic accurately. Sensors have also recorded the bridge’s exact position on the globe so that any movement can be detected. The bridge has since been dismantled and performed well. In the end, our assumptions proved slightly conservative, and we were able to use less prestressing. There is only one way to reach that conclusion: measurement.”

Monitoring completes the circle, Jansen concludes. “Knowing what is happening and how it is happening allows you to take targeted action and engineer new projects. For the 3D-printed bridge in Nijmegen, a test bridge that will eventually form part of the completed bridge, this enabled us to engineer the right prestressing force. Here, too, the specific prestressing force was measured during testing using sensors around the prestressing tendons. The results were exactly in line with the calculations. By making structures smarter with sensors, we can ultimately engineer them more intelligently.”  

Vraag over dit verhaal? Stel je vraag

Bedrijven in dit verhaal

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • OnderwerpGeneral
  • BedrijfJansen B.V.
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.