Aviko cold store, Steenderen | ‘Outstanding’ cold store for Aviko in Steenderen

Potato processor Aviko in Steenderen currently distributes its ready-made products among “various cold stores across the country”. The company has been working for years on a solution to reduce the number of transport movements, and it is now becoming a reality: an automated high-bay cold store is being built next to the factory in Steenderen. The New Aviko Cold Store will have eleven levels (with no intermediate floors), including 6,600 square metres of cold storage and 1,600 square metres of refrigerated storage, a 320-square-metre plant room, 420 square metres of offices and 2,000 square metres for dispatch.
“We’re building the outer shell,” says Bennie List, project manager at VDR Bouwgroep. It is a special shell, because Aviko is aiming for BREEAM-NL ‘Outstanding’. Cor van Dijken, sustainability manager at VDR, says: “Aviko’s ambition is to make the cold store as sustainable as possible.” Time was taken during the preparatory phase to achieve the best engineering, efficient work preparation and a safe site layout. Anyone entering the site will notice that specific rules apply: there are clearly marked parking spaces, a footpath gives visitors a safe route despite the driverless vehicles moving around, and waste on site is carefully sorted.

The various steel frames are pre-assembled at specially designated work areas.
In harmony
Architectural firm Bessels faced the challenge of making the massive building blend in with its surroundings, says project manager Cordy Volkers. “Among other things, because of the building’s height and the sightlines, we wanted it to blend in with the sky. Studies and similar buildings showed us that the sky is often not a clear blue. In general, it is a light greyish white,” he explains. “That is why we designed a green belt at the base, topped with a greyish-white upper section. Practical and effective.” This did, however, present another challenge: “White is the best solution for a cold store. Any colour creates stresses in the sandwich panels that can cause gaps. Dimensional stability is very important. The silo construction with racking already allows us to address the panel spans effectively. That is why we have made this concession after all.”

The design also anticipates innovations. “It needs to incorporate the latest developments,” says Marcel Bisseling, commercial director at VDR. The steel structure is closely interlinked with the requirements of the automation contractor. “The aim is to store things compactly,” says Jan Steverink of the Storax group, which is responsible for the steel structure. “Air in the building costs money. The less air there is, the better. It is also better for the climate, because that air has to be cooled,” he explains. Reducing the oxygen level in the cold store means that less air needs to be cooled and makes the building safer in the event of fire.
Another important decision was whether to use cranes or shuttles. Aviko opted for shuttles because cranes require a much higher load capacity. To get the most out of the steel structure, an unconventional shape was also chosen, with wide rather than narrow portal frames. “This creates a more stable base,” explains Steverink. The anchor boxes are receiving a lot of attention. “They need to be checked carefully, because these points recur throughout the construction process. If anyone deviates from them even slightly, problems will arise.”

Dress rehearsal
The construction process was carefully planned in advance. Van Dijken says: “The engineering phase took longer, but that speeds up the construction process. For BREEAM-NL ‘Outstanding’, you essentially do a dress rehearsal on paper. You look at where you source materials, align the processes and make sure everyone knows exactly what needs to be done. The advantage is that we cannot deviate either. That improves construction quality and efficiency.” By aiming for the highest BREEAM-NL rating, you create a building that is substantially more sustainable than a standard building. This involves a wide range of design measures and material choices. An airtightness test is used to measure air leakage and seal any gaps where necessary. Using waste heat from the cold store’s refrigeration system avoids the need for extra energy to heat the offices. The cold store is cooled a few degrees further overnight, allowing the system to be switched off during the day and preventing it from adding to the load on the grid.

The ecology around the cold store is being restored. This, too, is part of BREEAM-NL ‘Outstanding’. “Planting greenery and making the base a darker shade allows it to blend naturally into the background.” Construction will be completed by the end of this year, and the systems will then be commissioned. The cold store can be used from mid-2020.
Een zakelijke vraag aan VDR Bouwgroep? Neem contact op
Wie eraan werkte
Het Nieuwe Vrieshuis Aviko in Bronckhorst
- architectArchitectenbureau Bessels
- staalconstructieStorax-groep
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ProjectHet Nieuwe Vrieshuis Aviko
- OnderwerpProjects
- BedrijfArchitectenbureau Bessels
- BedrijfStorax-groep
- BedrijfVDR Bouwgroep


















