Building the Benelux’s largest distribution centre: an impressive 13 million kilos of steel
Tekst Carolien KleesBeeld DSV/Bouwbedrijf Vrolijk

The largest distribution centre in the Benelux has been taking shape at Logistiek Park Moerdijk. Bouwbedrijf Vrolijk is undertaking a unique project here at an astonishing pace: in ten months, it is building the complete structure of this warehouse, which covers 240,000 square metres including offices. In addition to the speed, the project presents numerous other challenges: various curves and cantilevers, a thousand rooftop parking spaces and BREEAM certification. Now that the structure is almost complete, we asked project manager Steffen Jansma to look back on the past few months and explain how Bouwbedrijf Vrolijk tackled all the challenges.
In addition to ten distribution halls, complemented by a 38,600-square-metre mezzanine, the project includes 200 loading docks and five separate office buildings. The new XXL warehouse is due for completion at the end of this year.

Overall project view
Jansma has worked at Vrolijk for fifteen years. “What makes this project special is its scale and the level of detail,” he says. “This is not a standard logistics building: it has specific aesthetic requirements. That calls for close cooperation between all colleagues. Normally, you have one overall view of the project, but this time we divided it into several subprojects. It took some getting used to, but it has worked out very well and has even improved cooperation and cohesion between colleagues.”

An architectural challenge
“The architectural features made the detailing and assembly sequence unique,” says Jansma. “Because we have our own design and engineering department, however, we were able to take on responsibility for the structural design. This meant we could not only take care of everything for the client, but also optimise the structural detailing and determine the construction sequence ourselves. And because we could produce the required 13 million kilos of steel ourselves at our new steel factory in Heiningen, we also maintained control over the timely delivery of materials.” The new Vrolijk Staalconcepten factory opened in 2024. Vrolijk opted to develop its own standard, allowing it to build even more efficiently, intelligently and sustainably. It also gives the company much greater control over the construction process.

Five erection teams
“Normally, one or two erection teams are used, but to complete this structure in a relatively short time, we needed no fewer than five,” Jansma stresses. “That naturally required very precise coordination. Each team started three weeks after the previous one, so it was extremely important that none of them fell behind. But everything went very smoothly! We owe that to the skills of our colleagues in the Planning department and to the excellent cooperation with our partners.”
Vrolijk is a collaborative contractor that works closely with established partners from pricing through to delivery. “During this construction process, too, it was clear that these long-standing relationships help everyone work well together. That is essential when around three hundred people are on site at the same time. After all, it is easier to respond to unexpected events and help each other meet every challenge.”

Rooftop car park
The rooftop car park is another special feature. It must not only support a thousand vehicles and several charging areas, Vrolijk also had to take account of the growing use of electric vehicles. “These are generally somewhat heavier than vehicles powered by fuel and require a longer access ramp. This makes it important to get the road surface build-up right. We ensured that the hollow-core floor slabs, the structural topping, the bedding sand and the paving were properly coordinated, so that the whole structure remains watertight.”
Welding robots
“Another crucial factor in meeting the deadline was the way we used temporary structural steel during construction,” Jansma says. “That brings me to another benefit of collaborative engineering: it can improve safety on site. For example, we incorporated the installation of the permanent staircases into the design, so they could be installed immediately, making the working environment much safer from the outset.”
Another distinctive feature of this new distribution centre is its trusses. It is rare in the Netherlands for welding robots to be used to manufacture these trusses, but that is exactly what they do at the new steel factory in Heiningen. “Trusses are labour-intensive products. Using robots for the welding ensures consistently high quality and extremely precise welds. This fits with our vision of using our own steel to optimise the construction process.”

Sustainability
Almost ninety per cent of all the distribution centres built by Vrolijk are designed to meet BREEAM certification requirements. Setting up a BREEAM department several years ago was therefore clearly worthwhile. “To provide clients with the best possible advice, our BREEAM experts keep a close eye on innovations in sustainable construction. These include modular construction and circular design, which make it possible to reuse materials. Urban mining is another example, recovering materials such as steel and concrete from old buildings for reuse. Steel beams and bricks from demolition projects, for instance, can be used in new-build projects.”
The steel factory in Heijningen also contributed to the sustainability of this building. “We decided to powder-coat the steel intended for indoor use. Thanks to our new powder-coating facility in Heijningen, we could apply the coating immediately after producing the steel. This improved efficiency and also made the structure more sustainable. If we had outsourced the coating to a third party, it would have required a great deal of transport, which is of course less favourable for the environment.”

Looking back
Jansma is rightly looking back on the construction phase with great satisfaction. “We are all incredibly proud of how it went and that we were able to do it together with our colleagues at Vrolijk Staalconcepten. It is quite an achievement to deliver this from a brand-new company!” Were there any lessons learned? “We are working to understand our clients’ processes better and better, so that together we can develop solutions that are fit for the future. This project has certainly helped us do that.”
Vraag over dit verhaal? Stel je vraag
Wie eraan werkte
Distributiecentrum DSV Moerdijk in Moerdijk
- prefab P&T-betonelementenVan Dijk Beton
- aannemerBouwbedrijf Vrolijk
Blijf dit volgen
Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.
- ProjectDistributiecentrum DSV Moerdijk
- OnderwerpProjects
- BedrijfBouwbedrijf Vrolijk


















