Projects

Prestressing system ‘preserves’ historic lock keeper’s house

Tekst Roel van GilsFotografie DYWIDAG

In totaal plaatst DYWIDAG acht voorspansystemen in lengterichting en vijf exemplaren in breedterichting dwars door de sluismeesterwoning.
In totaal plaatst DYWIDAG acht voorspansystemen in lengterichting en vijf exemplaren in breedterichting dwars door de sluismeesterwoning.

The Albert Canal in the Port of Antwerp is being renewed and adapted to accommodate increasingly large inland vessels. As part of this work, the Royers Lock is also undergoing a major upgrade and significant expansion. To preserve the area’s history, the distinctive lock keeper’s house dating from 1907 is being renovated and will be used to operate the new lock. DYWIDAG was brought in to use a temporary prestressing system to keep the house in place during excavation work.

The design for the new Royers Lock by architecture firm ZJA gives considerable attention to combining historic features with newly built elements. “With the expansion of the lock, the lock keeper’s house will effectively be left on an island,” begins Robert Jansen of DYWIDAG. “The area around the building will be excavated to a considerable depth. Before that happens, diaphragm walls will first be installed around the lock keeper’s house. To prevent the diaphragm walls from ‘falling’ outwards once the excavation is complete, we use our prestressing systems to anchor the walls to one another at the top, right through the house.”

Tensioning and release

The diaphragm walls will be installed to a depth of 21 metres, after which around 15 metres of soil will be excavated. “The house stands on piles, so the chance of it subsiding is negligible,” says Jansen. “The key is to keep the soil around the piles stable. That is why the building is being enclosed by diaphragm walls. The walls extend well into the ground, but there is no anchorage at the top. We address that with our prestressing system. We have developed a solution that can not only withstand the forces, but can also be released and removed after around three to four years.”

The system is based on a DYWIDAG 15-strand prestressing system with greased strands in a PE sheath. “A structural concrete beam is installed on the diaphragm wall. Our anchorage is built into it, allowing us to tension and release the entire system.”

Deformation

DYWIDAG is installing a total of eight prestressing systems in the longitudinal direction and five in the transverse direction through the building. “The strands pass right through the basement of the lock keeper’s house,” Jansen explains. “We deliberately apply a very low prestressing force and rely on the deformation mechanism. As the diaphragm wall inevitably bows outwards under its own weight, the cable comes under tension naturally. Once the work is complete, the soil will be backfilled and the diaphragm wall structure will bend slightly inwards again, causing the cable to slacken a little. We expect the structure not to return to its original position, which is why the prestressing systems will need to be released during the final phase.”

From a technical perspective, the prestressing structure at the lock keeper’s house is not particularly complex for DYWIDAG. Jansen says: “The spans and cable configuration are fairly standard. It is the application itself that makes this project special for us, along with the fact that we will be able to release the system after a few years. Temporary applications like this are not very common for our systems, which makes this one quite unique.”   

Vraag over dit verhaal? Stel je vraag

Wie aan Royerssluis werkte

  1. voorspansysteemDYWIDAGIn dit verhaal
  2. architectZJAIn dit verhaal
  3. steiger- en ondersteuningsconstructiesMatemco Hulpconstructies B.V.Genoemd in Versatile scaffolding and support systems for the Royerssluis expansion
  4. aannemersconsortiumTM Rinkoniên RechteroeverGenoemd in Versatile scaffolding and support systems for the Royerssluis expansion
  5. arbeidspartnerBELTEKGenoemd in Versatile scaffolding and support systems for the Royerssluis expansion

Blijf dit volgen

Bij een nieuw verhaal krijg je een e-mail. Geen account nodig.

Wat je volgt
  • ProjectRoyerssluis
  • ThemaBouwen in de bestaande stad
  • OnderwerpProjects
  • BedrijfDYWIDAG
  • BedrijfZJA
  • BedrijfJansen B.V.
Deel dit artikel

Advertentie

Volgen op Beton & Staalbouw

Volg

Bij een project of bedrijf krijg je een e-mail zodra er een nieuw verhaal over verschijnt, bij een thema of onderwerp één keer per week een overzicht. Geen account en geen wachtwoord: in elke mail staat een link naar wat je volgt.